Recently I hosted Massad Ayoob, Gail Pepin and David Maglio for a Massad Ayoob Group MAG-40 Course. The MAG-40 is a 40 hour course which is divided into two 20 hour sections. 20 hours of live-fire training on the range and 20 hours of classroom training on the Armed Citizens’ Rules of Engagement.
I have hosted each of these classes in the past, but for the first time I was able to participate in the MAG-20 Live-Fire as a shooter on the line.
Any time you have the chance to take a training course, there is the potential for learning and this class wasn’t any different. David Maglio led the class through the curriculum designed to teach and reinforce solid fundamentals in various shooting techniques ranging in distances from 4 to 15 yards.
15 yards was where I found the most to learn and that probably isn’t a surprise to folks that take the time to shoot at moderated distances. You see, distance magnifies your errors and really helps to show you what areas you need to improve.
What was a surprise to me was the problem I was having at 15 yards and what resolved the problem easily. Let me explain. My carry gun is a modified Gen 2 GLOCK 17. The gun has a grip that has been cut to the length of a GLOCK 19 so that a 15 round GLOCK 19 mag fits flush. In addition, I have swapped out the sights with a set of Amerlglo CAP sights with a green front sight. The CAP sights are designed for fast acquisition of the front sight which makes sense considering that CAP stands for Combat Application. The front sight blade is bright and wide at .140” which helps my eyes find the sight very quickly when presenting to the target.
All that width comes at a cost as I was reminded. At 15 yards that front sight width of .140” was wider than the a-zone of the USPSA target we were using throughout the course. When it came time to make consistent hits at distance, my group consistently opened up beyond the a-zone. I was displeased to say the least as one of the goals I had set was to score a 300 on the final qualification. A 300 would require all a-zone hits.
I made a quick decision just before the qualification to ditch the carry gun I was familiar with in favor of a gun with a narrower front sight blade. I swapped out my standard gun, holster and mag pouches for a Sig P320 and it’s related gear. My Sig is set up in a very similar manner to my GLOCK in that the slide is a full size with a small compact grip providing the same long slide with a flush fit 15 round Sig P320 magazine capacity. I didn’t know at the time the exact width measurement of the Sig’s front sight, but I knew it was a touch narrower. A touch narrower is exactly what I needed to keep all the shots in the a-zone and score a 300 on the 60 round qualification course.
Here is a direct number comparison between the CAP and Sig 3 dot #6 sights.
| Sight Comparison | |||
|---|---|---|---|
| Width in Inches | Front - Rear Difference | ||
| Ameriglo CAP Sights | Front Sight Blade | .140" | .010" |
| Rear Sight Notch | .150" | ||
| Sig Sauer #6 Sights | Front Sight Blade | .135" | .015 |
| Rear Sight Notch | .150" | ||
The thinner front sight and the slight increase of available light on each side of the front blade inside the rear notch made all the difference for me in the qualification and I managed to squeak out a 300.
Of course, with some time and effort I could make the CAP sights work at distance because we all know that it is the shooter not the equipment that matters. The fact that I could be forced to make a precision shot at 15 yards in a self-defense encounter in real life has helped me realize I need to make a change to sights that find more of a balance between fast sight acquisition and precision at distance.
There is always something to be learned when you are training as long as you are open to learn it.