The IWI Tavor has brought bullpup rifles up into the spotlight of popularity. Your stereotypical bullpup was relegated as a niche oddity for collecting purposes. Such as the Steyr Aug, P90, FS2000 and most of the bullpups available in the market. Part of the populartity of the Tavor is that it is issued and tested by the IDF.
Now they have brought out the X95. The X95 is an updated versionof the Tavor SAR. One of the biggest changes is the new relocated magazine release. Instead of the trigger style mag release found on the SAR mag well, the X95 has a push button similar to an AR15.
The Tavor X95 takes AR15 style magazines and while most of them will work in the gun, there are differing degrees of compatibility. Of the various makes of magazines I have on hand, only some of them work the best. I have tested these magazines by inserting them fullly loaded, partially loaded and empty. The best magazine was the Lancer L5AWM 30 round magazine. They dropped free in any condition. The next best magazine was the Gen2 Magpul PMAG. The Gen3 did not drop free when empty and neither did my windowed Gen2 PMAG. My old first generation PMAG actually worked better than my brand new Gen 3 PMAG. It drops free when empty and is easier to load with 30 rounds than the Gen3.
Troy Battlemags work rather well but needed to be pulled out when there were rounds in the magazine. By far the worst were the Hexmag and GI mags by Okay Industries. Both types saw a lot of friction between the mag well and the magazine bodies. Those magazines were difficult to insert and did not drop free at any stage of magazine capacity.
I also tested my two 40 round magazines by ASC and Magpul. The ASC works better than the Magpul with regards to inserting the full loaded 40 rd mag on a closed bolt. The ASC can actually hold more than 40 rounds so there is enough room for the rounds and follower to move down when inserted under the pressure of the closed bolt. The Magpul 40 round PMAG was tough to insert and required a bit of physical force to insert the magazine to lock into the mag catch. The ASC does fall short of the PMAG when it comes to removing the magazine The PMAG 40 round magazine drops free but the ASC does not. In fact it catched a bit and requires upwards force when the magazine was full. When they are empty both magazines drop free with ease.
My short 10 round pmag did fit just fine in the X95 as does my Magpul D60 Drum mag. Now the D60 is interesting. It fits and you can shoot it but it will touch the inside of your wrist unless you chicken wing the X95. This will position your wrist up and away from the body of the D60.
Most magazines will work in the X95. You just need to decide what kind of performance do you want in your magazine. I like my magazines to drop free and be easy to load on a fully loaded magazine. Of course I can always lock the bolt open but on an X95 it is a bit awkward to do so. The best scenario is to shoot to bolt lock and insert the magazine on an open bolt.